Jump to content

Paper of the Month

Papers in scientific journals are a crucial output of our research. They are the most important communication channel to share scientific findings and discoveries with the scientific community and to encourage a discussion thereof. Thus, papers are a substantial part of our competence as a research institute. With the series “Paper of the month” we want to call attention of a broader audience to our results.

  1. Focus area Analytical Sciences: Paper of the Month April is "Fibre optic ratiometric fluorescence pH sensor for monitoring corrosion in concrete",…

    Microplate with sensor layers showing the fluorescence response, sensor preparation (bottom left), sensors during concreting
  1. Focus area Environment: Paper of the Month March is „Hydrogen diffusion in creep-resistant 9% Cr P91 multi-layer weld metal", erschienen im Welding in…

    Graph of hydrogen diffusion in creep-resistant 9 percent Cr P91 multi-layer weld metal
  1. Veröffentlicht am 03/01/2020

    Focus area Infrastructure: Paper of the Month March is "Fire Phenomena of Rigid Polyurethane Foams", published in Polymers, 2019.

    Graphical abstract on fiire phenomena of rigid polyurethane foams
  1. Focus area Environment: Paper of the Month March is "Multivariate chemometrics as a key tool for prediction of K and Fe in a diverse German…

    Mobile XRF instrument setup with handheld XRF and XRF sensor for measuring moving samples (left) and rotating sample plate with track (right)
  1. Focus area Materials: Paper of the Month March is "Application of thermographic testing for the characterization of impact damage during and after…

    Thermogramms
  1. Focus area Analytical Sciences: Paper of the Month March is "Design and validation of an additively manufactured flow cell–static mixer combination…

    Additively manufactured SMX mixer evaluated through CFD simulation (left) and computed tomography (right)
  1. Focus area Infrastructure: Paper of the Month February is "A Novel Approach to Additive Manufacturing of Alkali-activated Materials: Laser-induced…

    Thermal imaging during manufacturing and finished part being lifted from the suspension
  1. Focus area Environment: Paper of the Month February is "Comparison of calcined illitic clays (brick clays) and low-grade kaolinitic clays as…

    Micrograph of a calcined brick clay with typical aggregates of platy (dehydroxylated) clay particles.
  1. Focus area Analytical Sciences: Paper of the Month February is "Wash-Free Multiplexed Mix-and-Read Suspension Array Fluorescence Immunoassay for…

    Illustration: The sample is mixed with reagents (particles and antibodies) and analyzed using a flow cytometer.
  1. Focus area Environment: Paper of the Month January is „Seasonal cooling performance of air conditioners: The importance of independent test procedures…

    Air conditioner and diagram

BAM is a senior scientific and technical Federal institute with responsibility
to the Federal Ministry for Economic Affairs and Energy.

Cookies